Pumping unit with surface pump (AquaPUMP GP)

Description

The AquaPUMP GP is a multistage surface centrifugal electric pump, very quiet, designed to provide pressure and flow to the installation: small domestic pressure units, single-family homes, sprinkler irrigation and rainwater reuse. Unlike the submersible pump, it is installed outside the well or tank.

Features

• Flow rate: 300 to 10,600 l/h.
• Head: 10 to 80 m.w.c.
• IP-44 protection, class F insulation.
• Closed motor with external ventilation; max. water temperature 50 ºC.
• Built-in thermal protector.

Accessories and add-ons

• AquaPRESS – Pressure regulator: automatic electronic control of the pump, maintenance-free; keeps the pump running while there is consumption and delivers constant pressure. It replaces the traditional pressure tank and switch, avoiding their typical problems (IP 65, max. temp. 65 ºC).
• AquaCLOR – Chlorination system: disinfection and preservation of stored rainwater by constant measurement and control of free chlorine with an amperometric probe and a hypochlorite dosing pump.
• AquaKIT-MIN – Automatic mains top-up: if the rainwater runs out, it supplies mains water via a level float, a 1” 24V solenoid valve and a control panel.
• AquaFILTER and other accessories for rainwater harvesting.

We configure the pumping unit to measure according to the flow rate and pressure you need. Request a quote indicating the use (domestic pressure, irrigation, rainwater reuse…) and the conditions of your installation.