Sampling chambers made of polyethylene

Description

The Inza sampling chamber is a prefabricated circular chamber in rotationally moulded polyethylene, with full top access, designed to collect representative samples of the water at the outlet of a treatment plant, a separator or any discharge point, and for the monitoring and control of the effluent. It can also be used as an inspection and registration chamber for the pipework.

It has inlet and outlet in DN110 or DN160 depending on the installation’s connection, fitted at different heights so that the sample corresponds to the flowing water and not to the stagnant water. It is light, corrosion-resistant and easy to install.

Available references:

Sampling recommendations: it is advisable to place the outlet at the bottom of the chamber to collect flowing water; samples are taken in clean containers and, where regulations require it, by means of representative, integrated sampling at different periods of time. Good sampling is essential to monitor performance and discharge quality.

Optional accessories: reinforced cover and neck extension (riser) to adapt the level to the installation depth. Please ask us.